Stendinių pranešimų sesijos

Stendinių pranešimų sesijose dalyviai pristatys savo tyrimus, dalysis mokslinėmis įžvalgomis ir atsakys į kolegų klausimus.

Tai galimybė susipažinti su įvairių mokslo sričių tyrimais, sulaukti klausimų ir grįžtamojo ryšio, užmegzti naujų profesinių ryšių bei tapti platesnės jaunųjų mokslininkų bendruomenės dalimi.

Stendiniai pranešimai (I dalis)

P01. Liutauras Vaičiulis – Mitigating Interfacial Losses at the Hole-Injection Interface in Quasi-2D Perovskite LEDs

P02. Miroslav Saniuk – Comparison of Cu X-ray Emission Generated by 1 μm and 2 μm Femtosecond Laser Pulses

P03. Ubaid ur Rehman – Femtosecond Laser-Written Photonic Integrated Circuits for Quantum Applications

P04. Mandeep Kaur – Enhanced Betatron X-ray Beams from Dual Stage Plasma Targets

P05. Dainius Balkauskas – Copper Micro-Path Electrodes for Transparent Electrochromic Devices: Effects of Line Spacing, Electrochromic Layer, and Electrolyte Composition on Performance

P06. Titas Tamošauskas – Electrochromic Coatings with Microstructured Copper Electrodes for “Smart Window” Applications

P07. Karolis Stravinskas – Mechanical and Thermal Property Optimisation of SiC Reinforced AlSi10Mg Alloy by LPBF

P08. Robertas Virkėtis – Direct Laser Writing of Upconverting YAG³⁺,Er³⁺ 3D Microstructures

P09. Patricija Strumilaitė – Characterisation of the Regularity of Laser-Induced Periodic Surface Structures in Metals and Semiconductors

P10. Ioanna-Angeliki Petsi – Two-Photon Lithography of Large-Area 3D Calibration Standards: Application to X-ray Imaging of Tooth Microcracks

P11. Lukas Stacevičius – Direct Generation of High-Order Structured Beams by Off-Axis Pumping in a Passively Q-switched Nd/Cr4+ Laser

P12. Lukas Razgūnas – Robotic Material Extrusion of Continuous Fibre Biopolymer Composites: A Comparative Study of Tensile and Flexural Behaviour

P13. Julius Lukošiūnas – Temperature Tuning of Femtosecond Mid-Infrared OPA Utilising Nonlinear BGSe Crystal

P14. Arnas Vyšniauskas – Towards Precision Manufacturing of Polymer IOL Using Femtosecond Pulses

P15. David Bolanos – Effects of Dual IR Laser Pulse Duration on Laser-Induced Graphene Formation on Kevlar

P16. Hatice Sema Polat – Copper Filling of High-Aspect-Ratio Vias in Glass by Laser Activation and Chemical Metal Deposition

P17. Neda Mažeikytė – Optical Contact Welding of Fused Silica with Ultrashort Pulse Bursts

P18. Dainius Ratkus – Silicon Carbide Wafer Ablation and Polishing Using Femtosecond Laser Pulses

P19. Bilal Islam – Simulation Analysis of Piezo-Electric Behaviour Using COMSOL

P20. Justas Andrijauskas – Metamaterial Structures: Numerical Modelling and Simulation in COMSOL and Fabrication via Femtosecond Laser Direct Writing

P21. Muhammad Irfan – Generation of Optical Needle & Arrays with Varying Vortices via Phase-Only Masks

P22. Denis Goldobin – Improving Near-Infrared Emission from III–V Semiconductor Quantum Wells Through Barrier Design

P23. Austėja Mikalčiūtė – Complete Exciton Hamiltonian for Photosynthetic Pigment-Protein Complexes

P24. Dariuš Antonovič – Tuning of Polycrystalline Lanthanum-Strontium-Manganite Film Properties with High Pulsed Magnetic and Electric Fields

P25. Ifra Bibi – Femtosecond Laser-Induced Near-Infrared Emitters in Hexagonal Boron Nitride

P26. Mantas Skaržinskas – Comparative Benchmarking of ML Models for Magnetic Field Prediction from Simulated ODMR Spectra

P27. Jorūnas Dobilas – Efficient First-Principles Modelling of Photoionisation Cross Sections: A Case Study of the NV Centre

P28. Ūla Elena Sauliūtė – Confocal Imaging via Biphoton Correlations

P29. Karolis Mundrys – Structured Light for Single-Pixel THz Homodyne Imaging

P30. Justas Žuvelis – Barrier-Dependent Annealing Response of GaAsBi/(Al,Ga)As Quantum Wells

P31. Paulius Kizevičius – Topologinio krūvio įtaka struktūrinei šviesai ir vieno pikselio THz vaizdavimui

P32. Giedrė Čepurnaitė – Epitaxial Growth of InAsSb Photodetectors for Monolithic Integration with Quantum Cascade Lasers

P33. Jaunius Berškys – InAs/GaSb Interband Cascade Infrared Photodetectors on GaSb: Enhanced Photoresponse Compared to InAsSb nBn Benchmarks

P34. Justina Žemgulytė – CDRA Array

P35. Benas Stanionis – Terahertz Emission Spectroscopy

P36. Stanislau Savitski – Topological Particles in Spherically Polarized Bessel-X Pulses

P37. Barbora Škėlaitė – Numerical Investigation of Quasi-BIC Resonances in GaAs-Based Structures in the THz Frequency Range

P38. Simonas Driukas – Optical Properties and Time-Resolved THz Spectroscopy of Ion-Implanted GeSn Films

P39. Jurgis Nekrošius – Development of Large-Aperture Diffractive Optics for Enhancing Radiation Directivity in the Sub-THz Range

P79. Evita Spalinskaitė – Lifetime Measurements of Plasmon-Exciton Polaritonic Emission Using a Single-Photon Avalanche Diode Array

Stendiniai pranešimai (II dalis)

P40. Apostolos Tsampodimos – Redundancy of Length in Physics

P41. Vilius Žalėnas – Time Domain Expansion and Freezing Investigation of Fast Analog Signals Using Cascaded Active Analog Memory Cell Array for Applications in Nuclear Spectroscopy

P42. Devankar Ghosh – Comparative Evaluation of Machine Learning Models for Short-Term Black Carbon Forecasting in Vilnius, Lithuania

P43. Nasim Safari – Beyond Traditional Cultivation: The Future of Technology-Centred Medicinal and Aromatic Plants Production

P44. Michael Abakpa – Hyperlocal Dynamics and Seasonal Inversion of Urban Black Carbon: A Case Study of High-Resolution Mobile Monitoring and Source Apportionment in Vilnius

P45. Ali Ashry Elsayed Alaref – Beyond the Non-Stick Surface: Multi-Level Toxicity of Polytetrafluoroethylene (PTFE) Microplastics in Chironomus riparius Larvae

P46. Tomas Stonkus – Distribution of Microplastics in the Indoor Air Dust of Lithuanian Schools, Their Physical and Chemical Properties

P47. Paulina Mozūraitė – Influence of Apatites and Whitlockite on the Physicochemical Properties of a Calcium Silicate-Based Root Canal Sealer

P48. Zarqa Hassan – Green Synthesis of AgNPs from Cucurbita maxima Seeds for Developing 3D Hybrid Structures

P49. Durre Nayab Habib – Do Stable Carbon Isotope Signatures of Residential Combustion PM1 Survive Atmospheric Aging?

P50. Viachaslau Alifirenka – Temporal Variability and Evolution of PM2.5 Sources in an Urban Environment: A PIXE–PMF Study in Vilnius, Lithuania

P51. Farah Mumtaz – Phosphate Modification Effects on OER Activity and Long-Term Stability of NiCoFeCrV Layered Double Hydroxides

P52. Shahid Nawaz – Development and Optimisation of NiCo-Based Electrocatalysts for the Hydrogen Evolution Reaction

P53. Karina Vjūnova – Development of Manganese–Iron-Supported Carbon Electrocatalysts for Enhanced Hydrazine Oxidation

P54. Nikoleta Ripinskaitė – Self-Assembled Organic Semiconductors for Tin-Containing Perovskite Solar Cells

P55. Gabija Janušauskaitė – Synthesis and Characterisation of Doped Double Molybdates and Tungstates MR(XO₄)₂ (M = Li⁺, Na⁺; R = Y³⁺, Gd³⁺, Bi³⁺; X = Mo⁶⁺, W⁶⁺)

P56. Dmytro Shyshkin – Enhancing Hydrazine Oxidation Through Au Modification of CoFeP and CoP Coatings

P57. Kamila Turuta – Photoelectrochemical Valorisation of Glycerol to High-Value C1–C3 Compounds Using WO₃-Based Photoanodes

P58. Mohd Sajid – Adhesion Without Active Sites Blocking: Binder-Free Titania-MXene Electrodes for Hydrogen Evolution

P59. Julija Usavičiūtė – AuCeO₂/C and AuCo₃O₄CeO₂/C Catalysts for Efficient Ethylene Glycol Oxidation

P60. Zeenat Fatima Iqbal – Development of Protective Biopolymer-Based Coatings for Polyester Surface Stabilisation

P61. Ujjawal Malani – Development of a Low-Cost Custom Aligner for Multilayer Lithography of Graphene Biosensor Arrays

P62. Saqib Ali – Smart MOF/MXene Heterostructures as Electrochemical Sensors for Emerging Contaminants

P63. Nauman Naeem – Tetracycline-Imprinted Poly(o-Phenylenediamine) on Chitosan/RGO-Modified Glassy Carbon Electrodes

P64. Gabrielė Rankelytė – Protein-Controlled Electronic Energy Transfer in Photosynthetic Complexes: An Efficient Computational Approach

P65. Artem Yerniiazov – In Situ Study: How Does Scan Rate Affect the Morphology of Electrografted Diazonium Salts?

P66. Shahbaz Khan – In-Silico Selection of an Imprinting Epitope and Functional Monomer for HER2 Detection by Molecularly Imprinted Polymers

P67. Felix Luecke – Polymer-Based Electrically Triggered Drug Delivery System

P68. Mantvydas Usvaltas – Immune Complexes Trigger Distinct Structural Remodelling in Macrophages

P69. Hassan Kouchakzadeh – Detection of Meloxicam Utilising a Surface-Engineered Platinum-Based Electrochemical Sensor

P70. Justina Liesytė – Real-Time Characterisation of DPP-IV Interactions with Specific Antibodies

P71. Jawaria Khan – Development of a Poly(oPD) Molecularly Imprinted Sensor for Amoxicillin on Gold-Nanostructured Screen-Printed Electrodes

P72. Muhammad Usman Khalid – Multifunctional PLA/Nb₂O₅ Nanocomposite Films with Enhanced UV-Shielding Activity for Active Food Packaging Applications

P73. Ernesta Vitulskienė – Live-Cell DNA Loci Imaging Using dCas12 and PAINT Microscopy

P74. Paulius Baronas – Process-Property Interactions in Sulfuric Acid Anodized Aluminium Alloys for Satellite Structures

P75. Lucciano Antonio Letelier Carreño – High-Diffraction-Efficiency Periodic Structures Fabricated by Deposition Methods

P76. Germante Paulikaite – RGO Nanomaterials for Organic Dye Removal

P77. Ignas Pikas – Specialised Optical Coatings for Quantum Applications

P78. Aswathi Raveendran – Influence of Amino Acid Capping Agents on the Structural and Magnetic Properties of CoFe₂O₄ Nanoparticles

P80. Andrej Mankievich – Ultrathin Chromium Films with Low Substrate-Side Reflectance from UV to NIR